Skip to main content

Your submission was sent successfully! Close

Thank you for signing up for our newsletter!
In these regular emails you will find the latest updates from Canonical and upcoming events where you can meet our team.Close

Thank you for contacting us. A member of our team will be in touch shortly. Close

  1. Blog
  2. Article

Jeremie Deray
on 29 April 2020

How to set up TurtleBot3 in minutes with snaps (1/2)


If you are a regular reader of our blog, you already know that our team got its hands on some TurtleBot3 robots. In previous posts, we have seen how to build them better, and how to improve the robot’s security with Ubuntu. In this post we will see how to build a snap to get started and set up the TurtleBot3 in a matter of minutes as opposed to going through the hassle of the whole installation process. Furthermore, we are expecting to run the snap on the TurtleBot3 itself, resulting in a self-contained robot.

This post explains how to rearrange launch files, configuration files and how to integrate this to lay the groundwork and set up our snap for the TurtleBot3. A follow-up post will show how to build the snap for the Raspberry Pi 3b+, the robot’s embedded computer, both directly on it and remotely. Finally we will see how to install and start using our Snappy TurtleBot3!

If you are new to ROS, we encourage you to have a look at the ROS tutorials. More specifically, the tutorial 8 introduces roslaunch which we’ll make an extensive us here.

The turtlebot3c

The code name of this operation is turtlebot3c. And just like any other operation it starts with a plan. The TurtleBot3 is a great learning platform and offers many features. We thus are looking to identify the most important high-level functionalities to map to applications in our snap. To do so we browse the TurtleBot3 GitHub repository together with its documentation website. We identified 3+1 functionalities that we want in our snap:

  • core is the soul of the robot. This application is responsible for turning on the actuators and sensors and for enabling the visualization of the robot in Rviz. It is our ‘+1’ as it encompasses all of the basic necessary components.
  • teleop allows us to drive the robot by different means, a remote controller, a keyboard or the navigation stack.
  • mapping launches the mapping algorithm that builds a representation of the environment into a map usable by the navigation stack.
  • navigation allows the robot to autonomously navigate from its current location to a given goal while avoiding obstacles and maintaining an estimate of its own location. It relies on the map built by the mapping application.

Now that the functionalities are identified, we want to map our launch file system accordingly. Fortunately most bits are available from the TurtleBot3 git repository and we only have to assemble them to our liking. We do so in a separate ROS package to keep our changes nice and separated from upstream. Nothing complicated here, the package mostly hosts launch files and config files. The package, naturally named turtlebot3c, is available on a public GitHub repo.

Core

For the core app, we aim at grouping together the node that communicates control commands to the motors (the controller) and the nodes advertising the sensor readings. It also includes loading the URDF model to the rosparam server so that the robot TF tree is published over the ROS network as well. The following command effectively takes care of bringing up the robot:

roslaunch turtlebot3c_bringup turtlebot3c_bringup.launch

This alone allows us to start working with our robot since one can fully visualize it in Rviz and perform tasks such as sending control commands to the motors. However, some additional work can significantly improve the user experience as we will see.


Visualization of the turtlebot3c at boot up.

Teleop

Suppose we have several nodes all publishing to the same topic. They are likely to interfere with each other. So how would you make sure to listen to one and only one source at a time? One solution is to use a multiplexer and that’s exactly what the mux node is. This node subscribes to several input topics but republishes only one of them. The choice as to which one is forwarded is done through a simple rosservice call. This feature comes in handy when one wants to drive the robot using different means, such as using a keyboard with the key_teleop, using a remote controller with the joy_teleop or leave it to the autonomous navigation stack. The mux node is exemplified below.


Graphical representation of the mux ROS node in use. Ovals and squares depict ROS topics and ROS nodes respectively.

One can choose which of its input the mux node will forward with a simple rosservice call.  For example, the command:

rosservice call /mux/select "topic: 'joy_vel'"

allows the robot to accept velocity commands from the joystick node only.

The joy_teleop package is the second aspect of the teleop application and enables joystick control of the robot. But not only. This ROS node also allows for mapping the buttons and axles of a remote controller to publishing messages on topics, sending  requests to services or even calling actions. This makes it the perfect interface to drive the TurtleBot3 with a remote controller while allowing you to switch from control command sources by the click of a button. The following command spawns the teleop application,

roslaunch turtlebot3c_teleop turtlebot3c_teleop.launch

Mapping

Several launch files exist in the TurtleBot3 repository to run and test different mapping applications and algorithms. Our task here mostly consists of selecting one algorithm that can be run directly on the Pi3 as those can be pretty computationally expensive. We picked for default gmapping, a well known, well established package in ROS. The mapping can be launch with the following command,

roslaunch turtlebot3c_2dnav turtlebot3c_mapping.launch

Once the mapping node has been launched, simply drive the robot around in order to map out the environment. Progresses can be easily monitored in Rviz. After the entire environment is mapped, remember to save the map before shutting the process down with the command:

rosrun map_server map_saver my/path/map

Navigation

Last but not least, the navigation app enables the autonomous navigation of the robot. It allows the robot to autonomously navigate from its current location to a desired goal while avoiding obstacles using the map generated by the mapping app. To start it, simply type the following command in a terminal,

roslaunch turtlebot3c_2dnav turtlebot3c_navigation.launch map_file:=my/path/map.yaml

where ‘my/path/map.yaml’ is the path to the map saved during mapping.


Sending a goal to the turtlebot3c through Rviz.

This concludes the first part of our TurtleBot3 set up. We have identified the different applications we would like to run on the robot and created the different launch files accordingly so that we have a one to one mapping between launch files and the desired snap applications.

In the second part, we will see how we can actually snap our ROS turtlebot3c project for the Raspberry Pi 3, executing the packaging process directly on the onboard computer. Finally we will set up the TurtleBot3 and start using it.


Related posts


gbeuzeboc
27 April 2023

Optimise your ROS snap – Part 6

Robotics Article

Welcome to Part 6 of our “Optimise your ROS snap” blog series. Make sure to check Part 5. This sixth and final part will  summarise every optimisation that we did. We will provide a critique for every optimisation that we tried along this series of blogs. Finally, we have reached the last part of this ...


gbeuzeboc
21 April 2023

Optimise your ROS snap – Part 4

Robotics Article

Welcome to Part 4 of our “optimise your ROS snap” blog series. Make sure to check Part 3 before. This fourth part is going to explain what dynamic library caching is. We will present how to use it to optimise ROS snaps, along with the different points to be careful about. Finally, we will apply ...


gbeuzeboc
17 April 2023

Optimise your ROS snap – Part 3

Robotics Article

Welcome to Part 3 of our “optimise your ROS snap” blog series. Make sure to check Part 2. This third part is going to present safe optimisations consisting of removing duplicates and unnecessary files. We will present three different methods as well as their cumulative benefits for the performance of ROS snaps. When snaps are ...